Construction and Building Materials - All About Wood Painting

Sometimes the old, polish, paint poured in a wooden item would like to renew an object from scratch or we can create new memories of crude to say hello. A little skill, care and patience is a very beautiful and useful products can occur. Thus, both the developed as well as your creativity free from the stress of the day you will think of as a therapy method. At every brush stroke is a discharge kattığınızda something of yourself you will find that this business is how much fun and relaxing

HOW?

Materials
Wooden objects (raw object that you have an old eşyanı or hobby stores), sand, acrylic paint, brushes of various thickness and varnish (on demand may also be semi-matte).
Instructions
First, we start by sanding work objemiz whatever. The object received from the dust with a dry cloth, because it has a silky surface, a coat of paint colors after making sure that we want to ride on.

After the first coat of paint has dried thoroughly, water zımparasıtla slightly, ie, zımparalıyoruz.

We can paint the second floor.

(For example, you can see the top right chair, has been used previously, is completely cleaned with sandpaper and then paint process was designed according to individual tastes.)

After finishing on the Authority or if you simply want to apply the technique to bring vernikleyip ready to use.


Techniques

Jigsaw

-Wooden objects
-Selected image to Implement
-Acrylic paint
-Decoupage glue
-Water sanding
-Brush (brushes of different thickness)
-Varnish

Zımparalayıp Objenizi clear. Make sure you have a smooth surface, especially copying and paste.

Photocopy the reverse sanding paper thin. This process will allow the paper to stick a lot easier and smoother.

The prepared surface with adhesive paste your picture on the jigsaw. Make sure no air bubbles on the surface to paste. By applying a technique or you want to complete the picture around objenizi Complete ...

Finally verniğinizi crawl. The object is ready. You are done.

TECHNOLOGY TRANSFER

-Wooden objects
-Selected image to Implement
-Acrylic paint
-White primer paint
-Transfer adhesive
-Water sanding
-Brush (brushes of different thickness)
-Varnish

Acrylic paint (1 paint + 2 water) is diluted with water. Flat hair brush with a thin coat is applied and dried. Over-dry the paint by sanding lightly sanded number zero (smooth surface provides good adhesion for paper copies).
Transfer spreadable glue brush or finger. A thin coat of painted surface of your artwork before, then transferred to a thin layer of adhesive paste is applied to the floor, left to dry. As for the second time the picture painted face of a rapidly dry and become more transparent with a thick layer of transfer adhesive is applied evenly and dried immediately adhered to the surface. Stuck out toward the edges by pressing lightly with a cloth. (Where a needle dipped in the remaining air bubble, air is removed by wiping). Transfer adhesive dry for at least 3 hours on standing as a complete and transparent. More than 3 hours before expected, but exceeded the process of removing the paper.

A little corner of the surface of the paper is moistened and begins servicing. Copiers places is intense colors of paper can easily be removed. White paper for not removing the paint in places photocopying requires more hydration. White areas of the paper must make sure cleaned. Otherwise, the paper layer on the surface roughness during polishing creates.

Image has been moved to the surface in a thin layer. Used in accordance with the paint brush with the appropriate colors and tamponlayarak picture is complete. Sharp-tipped brush is used where needed.

In the last polish, a glossy or matte varnish to surface cracking to the surface, matte finish spray is used.

Tip: Transfer when both the object on top of the transfer and the transfer of tutkalını copy will be on the creep and ensure no air bubbles at all. Wait for the transfer to open at least 2 days.